| 引用本文: | 宝音贺西,李俊峰.双线性检测滤波器及其故障可检测条件[J].控制理论与应用,2002,19(5):781~784.[点击复制] |
| BAOYIN He-xi,LI Jun-feng.Bilinear detection filter and its fault detectability condition[J].Control Theory and Technology,2002,19(5):781~784.[点击复制] |
|
| 双线性检测滤波器及其故障可检测条件 |
| Bilinear detection filter and its fault detectability condition |
| 摘要点击 1798 全文点击 689 投稿时间：2000-05-23 修订日期：2001-05-28 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| DOI编号 |
| 2002,19(5):781-784 |
| 中文关键词 双线性系统 检测滤波器 故障可检测性 |
| 英文关键词 bilinear system detection filter fault detectability |
| 基金项目 清华大学基础研究基金(JC2000038); 中国博士后科学基金 [(2001)31]资助项目. |
|
| 中文摘要 |
| 研究了双线性检测滤波器的故障可检测条件. 设计了一种检测滤波器, 并得到了其故障完全可检测的严格条件. 结果表明要使检测滤波器故障完全可检测, 系统独立的传感器和独立的状态数至少和系统故障种类相同. 这个结果符合线性空间的性质. 最后利用所构造的滤波器分析了算例. |
| 英文摘要 |
| The fault detectability condition of bilinear detection filter, a class of nonlinear system, is investigated. A detection filter is designed, and its fault complete detectability condition is obtained. The result indicates that, to make the system faults completely detectable, the system must be of the same number of sensors and independent system states as that of system faults. According to linear space characters, the result is correct. An example is presented for detection filter at last. |
|
|
|
|
|