引用本文:郑剑飞,冯 勇,陆启良.永磁同步电机的高阶终端滑模控制方法[J].控制理论与应用,2009,26(6):697~700.[点击复制]
ZHENG Jian-fei,FENG Yong,LU Qi-liang.High-order terminal sliding-mode control for permanent magnet synchronous motor[J].Control Theory and Technology,2009,26(6):697~700.[点击复制]
永磁同步电机的高阶终端滑模控制方法
High-order terminal sliding-mode control for permanent magnet synchronous motor
摘要点击 1628  全文点击 1969  投稿时间:2007-10-18  修订日期:2008-10-13
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/j.issn.1000-8152.2009.6.023
  2009,26(6):697-700
中文关键词  永磁同步电机  高阶滑模  终端滑模  矢量控制
英文关键词  permanent magnet synchronous motor  high-order sliding mode  terminal sliding mode  vector control
基金项目  国家自然科学基金资助项目(60474016, 60774040).
作者单位E-mail
郑剑飞 哈尔滨工业大学 电气工程系, 黑龙江 哈尔滨 150001 zjf6303234@163.com 
冯 勇 哈尔滨工业大学 电气工程系, 黑龙江 哈尔滨 150001 yfeng@hit.edu.cn 
陆启良 哈尔滨工业大学 电气工程系, 黑龙江 哈尔滨 150001 lu_regal@sohu.com 
中文摘要
      提出一种基于高阶终端滑模的永磁同步电机转速控制方法, 提高了系统的鲁棒性和响应速度. 根据矢量控制原理, 设计了非奇异终端滑模面, 使得电机转速、直轴电流、交轴电流在有限时间内达到给定值. 同时, 采用高阶滑模消除抖振, 保证系统的稳定性. 仿真结果表明, 和PI控制方法相比, 电机转速能够更快地跟踪给定值, 并且, 系统对于负载扰动具有较强的鲁棒性.
英文摘要
      A permanent magnet synchronous motor speed control based on high-order terminal sliding mode is proposed to improve the robustness and the response speed of the system. Based on the vector control principle, nonsingular terminal sliding modes are designed to make the motor speed, the d-axis current and the q-axis current reach the given values in a finite period of time. Meanwhile, high-order sliding modes are utilized to eliminate the chattering phenomenon, and to guarantee the stability of the system. The simulation results show that the motor speed can reach the given value more rapidly than that of a proportional integral(PI) control; and the system is robust with respect to the load disturbances.