引用本文:甘亚辉,戴先中,陆志远.关节型机器人的似人操作构型规划[J].控制理论与应用,2013,30(5):549~557.[点击复制]
GAN Ya-hui,DAI Xian-zhong,LU Zhi-yuan.Human-like manipulation planning for articulated manipulator[J].Control Theory and Technology,2013,30(5):549~557.[点击复制]
关节型机器人的似人操作构型规划
Human-like manipulation planning for articulated manipulator
摘要点击 3258  全文点击 2634  投稿时间:2012-10-12  修订日期:2013-01-16
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2013.21047
  2013,30(5):549-557
中文关键词  操作构型规划  似人程度  快速上肢评价  应用人体工程学  传速速率
英文关键词  manipulation planning  human-like  rapid upper limb assessment  applied ergonomics  velocity transmission ratio
基金项目  国家自然科学基金资助项目(61175113); 国家高技术研究发展计划资助项目(2006AA040402, 2007AA041703, 2009AA043903-1-1); 江苏省科技成果转化资助项目(BA2007058); 江苏省普通高校研究生科研创新计划资助项目(CX10B 076Z); 东南大学优秀博士学位论文基金资助项目.
作者单位E-mail
甘亚辉* 东南大学 自动化学院
复杂工程系统测量与控制教育部重点实验室 
ganyahui@yeah.net 
戴先中 东南大学 自动化学院
复杂工程系统测量与控制教育部重点实验室 
 
陆志远 东南大学 自动化学院
复杂工程系统测量与控制教育部重点实验室 
 
中文摘要
      对关节型机器人的操作构型进行规划时, 本文提出了一种新的规划方法, 它结合了似人评估准则和机器人传速特性优化的概念, 可实现有最大末端传速特性的操作, 同时与人类手臂操作的特点最为相似. 该方法首先利用应用人体工程学中的快速上肢评价准则(RULA)对机器人的操作空间进行划分, 然后在各子空间内最大化机器人末端沿指定方向的传速速率. 最终选定一个最符合人类操作特性又同时满足操作任务的机器人操作构型. 通过在2自由度平面机器人和7自由度拟人机械臂上的规划实验进一步展示了本方法的使用, 规划结果验证了其有效性.
英文摘要
      In planning the operation configuration for an articulated manipulator, we propose a novel method which combines the concept of human-like assessment and the velocity transmission ratio. By this method of planning, the manipulator can perform operations most similar to the operations of a human arm, with maximal velocity transmission ratio at its end-effector. The criterion of the rapid upper limb assessment (RULA) which is widely used in applied ergonomics has been adopted to divide the robot operation configuration space into different subregions, in which the velocity transmission ratio of the manipulator along a specified direction is maximized. Then, the final planning result which satisfies the task requirements with the most human-like operations is determined. Illustrative examples of this method applied to a 2 degrees of freedom (DOF) planar robot and a 7-DOF humanoid arm validate its effectiveness.