引用本文:王昭磊,王青,董朝阳,倪茂林.基于异步切换多胞系统的网络化飞行器故障检测[J].控制理论与应用,2014,31(6):677~686.[点击复制]
WANG Zhao-lei,WANG Qing,DONG Chao-yang,NI Mao-lin.Fault detection for networked flight vehicle based on asynchronously switched polytopic system approach[J].Control Theory and Technology,2014,31(6):677~686.[点击复制]
基于异步切换多胞系统的网络化飞行器故障检测
Fault detection for networked flight vehicle based on asynchronously switched polytopic system approach
摘要点击 2035  全文点击 2256  投稿时间：2013-09-16  修订日期：2014-03-01
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2014.30978
  2014,31(6):677-686
中文关键词  故障检测  切换多胞  异步切换  时延  丢包
英文关键词  fault detection  switched polytopic system  asynchronous switching  time delay  packet loss
基金项目  国家自然科学基金资助项目(61074027).
作者单位E-mail
王昭磊* 北京航空航天大学 自动化科学与电气工程学院 beiliwzl123@163.com 
王青 北京航空航天大学 自动化科学与电气工程学院  
董朝阳 北京航空航天大学 航空科学与工程学院  
倪茂林 中国宇航学会  
中文摘要
      本文研究了存在时变短时延和随机丢包的大包线网络化飞行器故障检测问题. 首先, 采用切换多胞系统描述飞行动态, 并提出了一种局部重叠多胞划分方式以较低设计保守性. 然后, 借助泰勒级数展开和伯努利分布将时 延和丢包转化为多胞系统参数, 并构建了切换参数依赖故障检测滤波器. 同时, 考虑滤波器切换指令及多胞加权参数更新滞后引起的异步切换问题, 基于切换参数依赖Lyapunov函数和平均驻留时间方法分析了系统的稳定性和l_2性能, 并以LMI形式给出了滤波器存在的充分条件. 最后, 以HiMAT(highly maneuverable technology)飞行器为例验证了所提方法的有效性.
英文摘要
      The fault detection problem is investigated for the full-envelope networked flight vehicle with time-varying short delay and stochastic packet loss. First, the flight dynamics is modeled as a switched polytopic system, and a locally overlapped region partition method is presented to reduce the design conservatism. Then, the delay and packet loss can be transformed as polytopic system parameters by introducing Bernoulli distributing and Taylor series expansion, and the switched parameter-dependent fault detection filters are established. Also, considering the updating lags of the filter switching signals and weight parameters of the polytopic subsystems, we analyze the system stability and l_2 performance under asynchronous switching by combing the switched parameter-dependent Lyapunov function and the average dwell time method, and the sufficient existing conditions of filters are derived in the form of LMIs. Finally, numerical examples based on the HiMAT (highly maneuverable technology) vehicle are given to demonstrate the effectiveness of the proposed method.