引用本文:陈子印,林喆,康建兵,贾鹤鸣,于飞.基于滤波反步法的三相永磁同步电机伺服控制[J].控制理论与应用,2017,34(4):515~524.[点击复制]
CHEN Zi-yin,LIN Zhe,KANG JIan-bing,JIA He-ming,YU Fei.Servo control of three-phase permanent magnet synchronous motor based on command filtered backstepping[J].Control Theory and Technology,2017,34(4):515~524.[点击复制]
基于滤波反步法的三相永磁同步电机伺服控制
Servo control of three-phase permanent magnet synchronous motor based on command filtered backstepping
摘要点击 3193  全文点击 2303  投稿时间：2015-11-22  修订日期：2017-01-10
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2017.50922
  2017,34(4):515-524
中文关键词  永磁同步电机  伺服控制  滤波反步法  抗饱和  粒子群优化
英文关键词  permanent magnet synchronous motor (PMSM)  servo control  command filtered backstepping (CFBS)  anti-windup  particle swarm optimization (PSO)
基金项目  国家重点研发计划(2016YFB0500702), 国家自然科学基金项目(41401411), 中央高校基本科研业务费专项资金项目(2572014BB03)
作者单位E-mail
陈子印* 北京空间机电研究所 chenziyin_heu@163.com 
林喆 北京空间机电研究所  
康建兵 北京空间机电研究所  
贾鹤鸣 东北林业大学  
于飞 北京空间机电研究所  
中文摘要
      为解决永磁同步电机的角度伺服控制问题. 基于dq轴坐标系建立的电机控制模型, 采用滤波反步法设计位置伺服控制器, 通过稳定二阶滤波过程逼近虚拟控制量的导数, 避免了常规反步法中对虚拟控制量解析求导的繁琐 过程. 通过设计滤波误差补偿环节, 保证了滤波器输出信号对输入信号的跟踪精度. 基于李雅普诺夫稳定性理论设计鲁棒项, 保证了闭环跟踪误差的稳定性, 并采用粒子群算法对控制器参数进行优化. 最后, 通过仿真实验结果表明了该算法的有效性,且具有较高的跟踪精度.
英文摘要
      To solve the problem of angular servo control of permanent magnet synchronous motor (PMSM). Based on the control model of PMSM expressed in direct-quadrature (dq) coordinate frame, the command filtered backstepping (CFBS) method is employed for controller design, so the derivatives of virtual control variables can be approximated by a stable second-order filter which can avoid the increasing complexity in calculating the analytic derivatives of the virtual control in conventional backstepping method. A filtered error compensation loop is designed to guarantee that the filtered signal can precisely track the reference input signal. The robust schemes are designed through Lyapunov stability analysis with guaranteed stability for the close-loop of tracking errors, while the particle swarm algorithm is adopt for the optimization of controller parameters. Finally, the simulation results are presented to illustrate the effectiveness of the proposed control method with accurate tracking performance.