引用本文:宋莎莎,赵忠盖,刘飞.模型参数失配有界下的扩展集员估计方法[J].控制理论与应用,2017,34(5):648~654.[点击复制]
SONG Sha-sha,ZHAO Zhong-gai,LIU Fei.Extended set membership filtering method for process with bounded-mismatch parameters[J].Control Theory and Technology,2017,34(5):648~654.[点击复制]
模型参数失配有界下的扩展集员估计方法
Extended set membership filtering method for process with bounded-mismatch parameters
摘要点击 2239  全文点击 2120  投稿时间:2016-11-18  修订日期:2017-03-07
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2017.60866
  2017,34(5):648-654
中文关键词  参数失配有界  状态估计  扩展集员估计  区间运算
英文关键词  bounded-mismatch parameters  state estimation  extended set membership filter  interval arithmetic
基金项目  国家自然科学基金项目(61573169)资助.
作者单位E-mail
宋莎莎 江南大学轻工过程先进控制教育部重点实验室 18806185698@163.com 
赵忠盖* 江南大学轻工过程先进控制教育部重点实验室 gaizihao@jiangnan.edu.cn 
刘飞 江南大学轻工过程先进控制教育部重点实验室  
中文摘要
      在非线性模型参数失配下, 直接采用滤波算法很难获到理想的估计状态. 本文基于扩展集员估计方法, 在 状态估计中引入参数的不确定信息, 提出一种参数失配有界下的状态估计方法. 该方法应用区间或集合运算的法 则, 计算由参数失配引起的偏差范围, 并将其用椭球集外包. 在状态估计的预测步, 通过该偏差椭球集与先验椭球 区间的并运算, 得到预测椭球区间; 在状态估计的更新步, 利用观测椭球集对预测椭球区间进行更新, 从而得到后验 椭球集合以及状态估计值. 最后, 在数值仿真和发酵模型中的仿真应用验证了算法的有效性.
英文摘要
      Given a nonlinear model with mismatch parameters, it is difficult to obtain an accurate state estimation via the general filtering methods. In this paper, based on the extended set membership estimation method, a novel state estimation method is proposed for the processes with bounded-mismatch parameters by introducing the uncertainty information of parameter. In the proposed method, the deviation scope caused by the parameter mismatch is calculated by the interval operation and interval expansion functions, then it is enclosed by a ellipsoid set. In the prediction step of state estimation, the prediction ellipsoid is obtained by the summation of the parameter deviation ellipsoid set and the interval of the priori ellipsoid; In the update step, by using the observation ellipsoid set to update the priori ellipsoid, the posterior ellipsoid set and then the state estimate are derived. The applications in a numerical example and a fermenter process show the effectiveness of the proposed method.