引用本文:李建雄,张文博,章启宇,方一鸣.基于扩张状态观测器的 连铸结晶器振动位移系统自适应滑模控制[J].控制理论与应用,2019,36(1):120~128.[点击复制]
LI Jian-xiong,ZHANG Wen-bo,ZHANG Qi-yu,FANG Yi-ming.Adaptive sliding mode control for the oscillation displacement system of continuous casting mold based on extended state observer[J].Control Theory and Technology,2019,36(1):120~128.[点击复制]
基于扩张状态观测器的 连铸结晶器振动位移系统自适应滑模控制
Adaptive sliding mode control for the oscillation displacement system of continuous casting mold based on extended state observer
摘要点击 2331  全文点击 1220  投稿时间：2017-07-19  修订日期：2018-03-23
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2018.70490
  2019,36(1):120-128
中文关键词  连铸结晶器  振动位移系统  扩张状态观测器  非奇异终端滑模控制  自适应增益
英文关键词  continuous casting mold  oscillation displacement system  extended state observer  nonsingular terminal sliding mode control  adaptive gain
基金项目  国家自然科学基金(61403332)；河北省自然科学基金(F2017203304，F2015203400)；河北省人才工程培养经费资助科研项目(A2016015002).
作者单位E-mail
李建雄 燕山大学电气工程学院自动化系 jxli@ysu.edu.cn 
张文博 燕山大学电气工程学院自动化系  
章启宇 燕山大学电气工程学院自动化系  
方一鸣* 燕山大学电气工程学院自动化系 fyming@ysu.edu.cn 
中文摘要
      针对伺服电机驱动的连铸结晶器振动位移系统中存在时变负载转矩、参数不确定性等问题, 本文提出了一 种基于扩张状态观测器(extended state observer, ESO)的自适应非奇异终端滑模(nonsingular terminal sliding mode, NTSM)控制方法. 首先, 设计ESO对系统存在的综合扰动和不可测状态进行估计. 然后, 采用分层设计的方法, 分别 对位移跟踪子系统和电流环子系统设计基于ESO的自适应NTSM控制器和滑模控制器. 为削弱ESO估计误差对跟 踪精度的影响, 在NTSM控制器中引入了自适应增益. 可以证明, 所设计的控制器能够保证闭环系统所有信号有界, 系统状态可渐近收敛到原点附近的小邻域内. 最后, 仿真结果验证了所提出控制方法的有效性.
英文摘要
      The adaptive nonsingular terminal sliding mode (NTSM) control algorithm based on an extended state observer (ESO) is proposed for an oscillation displacement system of continuous casting mold driven by servo motor, in which there exists time-varying load torque disturbance, and parameter uncertainties, etc. Firstly, an ESO is constructed to estimate the total disturbance and the unmeasurable state. Secondly, a hierarchical control scheme is adopted, and an ESO-based adaptive NTSM controller and two sliding mode controllers are designed for the position tracking subsystem and current control subsystems, respectively. In order to reduce the effect of the ESO estimation error on the tracking accuracy, an adaptive gain is introduced in the NTSM controller. It can be proved that the all of the signals of the resulting closed-loop system are bounded, and the system states converge to a small neighborhood of the origin asymptotically. Finally, simulation results demonstrate the effectiveness of the proposed method.