| 引用本文: | 薛 燕,刘 克.基于预测值控制的变采样网络控制系统[J].控制理论与应用,2009,26(6):657~660.[点击复制] |
| XUE Yan,LIU Ke.Variable-sampling-rate networked control systems based on prediction-value control[J].Control Theory and Technology,2009,26(6):657~660.[点击复制] |
|
| 基于预测值控制的变采样网络控制系统 |
| Variable-sampling-rate networked control systems based on prediction-value control |
| 摘要点击 1112 全文点击 1005 投稿时间：2007-05-09 修订日期：2008-10-13 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| DOI编号 10.7641/j.issn.1000-8152.2009.6.014 |
| 2009,26(6):657-660 |
| 中文关键词 网络控制系统 变采样 事件–时间驱动 预测误差 预测时间 |
| 英文关键词 networked control systems variable sampling-rate event-time driving prediction error prediction time |
| 基金项目 北京市教育委员会重点学科共建项目组资助项目(100080537). |
|
| 中文摘要 |
| 利用节点采用事件–时间驱动方式建立了变采样网络控制系统, 在固定时延稳定控制的基础上, 根据预测控制值和预测反馈值给出该系统在变时延下所对应的状态转移矩阵, 研究了满足变采样网络控制系统稳定的预测误差和预测时间的条件, 最后给出了一个例子说明分析的结果. |
| 英文摘要 |
| A variable-sampling-rate networked control system is developed by means of the event-time-nodes-driving. On the basis of the stable control with time-invariant network-delay, we use the predicted control value and the predicted feedback value to develop the state transfer matrix of the networked control system with time-varying network-delay. The prediction error bound and the conditions on the prediction time for ensuring the stability of the networked control systems with variable sampling-rate are studied. Finally, an example is given to illustrate the analysis results. |