引用本文:段文杰,王大轶,刘成瑞.卫星控制系统离散积分滑模容错控制[J].控制理论与应用,2015,32(2):133~141.[点击复制]
DUAN Wen-jie,WANG Da-yi,LIU Cheng-rui.Discrete-time integral sliding-mode fault-tolerant controller for satellite control system[J].Control Theory and Technology,2015,32(2):133~141.[点击复制]
卫星控制系统离散积分滑模容错控制
Discrete-time integral sliding-mode fault-tolerant controller for satellite control system
摘要点击 2945  全文点击 2106  投稿时间:2014-07-15  修订日期:2014-10-22
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2015.40662
  2015,32(2):133-141
中文关键词  卫星  滑模  容错控制  不确定性  健康因子
英文关键词  satellite  sliding-mode  fault-tolerant control  uncertainties  efficiency factor
基金项目  国家自然科学基金项目(61203093, 11202011)资助.
作者单位E-mail
段文杰 北京控制工程研究所
空间智能控制技术重点实验室 
wenjie_duan@163.com 
王大轶* 北京控制工程研究所
空间智能控制技术重点实验室 
dayiwang@163.com 
刘成瑞 北京控制工程研究所
空间智能控制技术重点实验室 
 
中文摘要
      卫星控制系统是采样控制系统, 对它来讲, 不确定性离散系统容错控制方法非常重要. 本文提出了一种离散积分滑模容错控制方案, 用于调节动量轮有故障的卫星姿态, 其主要部分是设计控制器和控制分配方法. 本文对含有匹配和不匹配的不确定性的离散多输入多输出系统, 设计了一种离散积分滑模控制器, 分析了匹配的和不匹配的不确定性对闭环系统稳定性的影响, 得出了系统状态的界. 应用可达集方法确定控制分配方案时, 本文改变可达集表面的搜索顺序, 提高了求解速度. 以五动量轮卫星模型为例, 将本文方法应用于含多故障、健康因子不准确、匹配不确定性和不匹配不确定性的卫星控制系统中, 理论和仿真的结果一致.
英文摘要
      Satellite control systems are sample-data control systems, to which the method for designing the discretetime fault-tolerant controller with uncertainties is of great significance. A discrete-time integral sliding-mode fault-tolerant control approach is proposed for regulating the attitude of a satellite with reaction wheel faults. The major portion of this approach includes the controller design and the control allocation. A discrete-time integral sliding-mode controller is thus developed for discrete-time MIMO linear time-invariant (LTI) systems,in which the matched and unmatched uncertainties are considered for closed-loop stability, and the final boundaries of system states are determined. In determining the control allocation based on the attainable moment space (AMS), the facets of the AMS is rearranged for reducing the calculation. This approach is applied to the simulation of a five-wheel satellite with multi-faults, inaccurate efficiency factors, matched and unmatched uncertainties. Simulation and analysis results are almost in coincidence with each other.