引用本文:李广印,杨扬.含有未知控制方向的非线性时滞系统学习控制[J].控制理论与应用,2016,33(2):265~272.[点击复制]
LI Guang-yin,YANG Yang.Learning control for nonlinear systems with unknown control direction and unknown time-varying delay[J].Control Theory and Technology,2016,33(2):265~272.[点击复制]
含有未知控制方向的非线性时滞系统学习控制
Learning control for nonlinear systems with unknown control direction and unknown time-varying delay
摘要点击 2139  全文点击 1789  投稿时间:2015-03-06  修订日期:2015-10-29
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2016.50163
  2016,33(2):265-272
中文关键词  时变时滞  未知控制方向  非线性参数化系统  Nussbaum增益技术
英文关键词  time-varying delay  unknown control direction  nonlinearly parameterized systems  Nussbaum-gain technique
基金项目  云南省教育厅科学研究重点项目(2015Z069), 云南师范大学博士科研启动基金项目(01000205020503065)资助.
作者单位E-mail
李广印 云南师范大学信息学院 LiGuangYinXNLD@163.com 
杨扬* 云南师范大学信息学院 yyang ynu@163.com 
中文摘要
      本文对于一类含有未知控制方向及时滞的非线性参数化系统, 设计了自适应迭代学习控制算法. 在设计控 制算法过程中采用了参数分离技术和信号置换思想来处理系统中出现的时滞项, Nussbaum增益技术解决未知控制 方向等问题. 为了对系统中出现的未知时变参数和时不变参数进行估计, 分别设计了差分及微分参数学习律. 然后 通过构造的Lyapunov-Krasovskii复合能量函数给出了系统跟踪误差渐近收敛及闭环系统中所有信号有界的条件. 最后通过一个仿真例子说明了控制器设计的有效性.
英文摘要
      In this work, we propose an adaptive iterative learning control algorithm for a class of nonlinearly parameterized systems with unknown control direction and unknown time-varying delay. The existing unknown time-varying delay is well resolved by using parameter separation method and signal replacement mechanism in the process of the design, and the lack of a priori knowledge of the control direction is also dealt with by the Nussbaum-gain technique incorporated into the control design. Moreover, both difference and differential updating laws are configured for the estimates of the unknown time-varying parameter and the constant parameter. Then based on a constructed Lyapunov-Krasovskii composite energy function, a sufficient condition of the convergence of the system error asymptotically along the iteration axis and the boundedness of all signals in the closed-loop system is given. A simulation example is presented to validate the effectiveness of the proposed control method.